Description

Asmaco Weld-fix  Cement CPVC Glue – 473ml

ASMACO Weldfix® is specially formulated solvent based adhesive used for cementing and
joining pipes and pipe fittings made of Chlorinated PVC (CPVC). It is medium viscosity high
strength CPVC solvent cement for all classes and schedules of pipe and fittings with
interference fit, including Schedule 80 through 12 inch (315 mm) diameter. Also
recommended for PVC industrial piping systems for chemical applications.

Key Performance Properties:

• Easy to use
• One part application
• Safe for Drinking water after full cure
• Rapid curing
• Strong, durable bond
• Meets BS & ASTM Standard

Applications:

Cut pipe squarely, chamfer (15 degrees) and de-burr. Insert the pipe in the fitting and mark
depth. Clean both surface ends thoroughly with Weldfix Cleaner and clean tissue paper. Stir
Weldfix® well and apply an even layer of adhesive (thin layer on fitting, thicker on pipe) in
an axial direction with a brush. Assemble the parts within 4 minutes (at 23oC) without turning and hold firmly for few seconds. Wipe off excess adhesive. Assembled joint should not be
disturbed for 5 minutes (below 10oC, 15 min.). For better results put pipe into use after one
hour. Replace cap tightly after use. After carrying out any welding work, pipes should be
filled with water, rinsed and flushed thoroughly before using.