INGCO EE-MEA-IN-SM-30-6-ANDELI,Insulator
INGCO EE-MEA-IN-SM-30-6-ANDELI,Insulator
INGCO EE-MEA-IN-SM-30-6-ANDELI,Insulator
INGCO EE-MEA-IN-SM-30-6-ANDELI,Insulator

INGCO EE-MEA-IN-SM-30-6-ANDELI,Insulator

INGCO EE-MEA-IN-SM-30-8-ANDELI,Insulator INGCO EE-MEA-IN-SM-30-8-ANDELI,Insulator
A close-up photo of a portable, electric-powered INGCO PTPW-SML-2200MC-SHUIMOLI pressure washer. It has a black spray wand with a trigger nozzle and a long black hose attached. The pressure washer also has a yellow frame with black wheels and a gray pump housing. There is a water inlet hose attached to the side of the pressure washer, and a black electric cord. INGCO PTPW-SML-2200MC-SHUIMOLI Pressure Washer
INGCO EE-MEA-IN-SM-30-6-ANDELI,Insulator

INGCO EE-MEA-IN-SM-30-6-ANDELI,Insulator

In stock
0 out of 5
( There are no reviews yet. )

Benefits of Using SM-30-6 Insulators:

  • Support and Insulation: They provide secure support for busbars within the enclosure, preventing them from contacting other components and causing short circuits. The resin material insulates the busbar electrically.
  • Strain Relief: They absorb strain where the busbar enters the enclosure, preventing damage to the busbar itself.
  • Organization: Busbar insulators help organize and maintain proper spacing between busbars within the enclosure.
SKU: EE-MEA-IN-SM-30-6-ANDELI Categories: ,

Description

INGCO EE-MEA-IN-SM-30-6-ANDELI,Insulator(EE-MEA-IN-SM-30-6-ANDELI)

product details:

Size:

  • SM-30: This likely refers to the overall height of the insulator, approximately 30 millimeters (1.18 inches).
  • 6: This most likely indicates a screw size (M6) for mounting the insulator, rather than a diameter measurement. The diameter typically varies depending on the specific busbar size the insulator is designed for.

Material:

  • The most common material for SM-30-6 insulators is likely a high-strength resin, such as DMC (Dough Molding Compound) or Nylon 66 (PA66). These materials offer affordability, lightweight properties, good chemical resistance, and sufficient dielectric strength for low-voltage busbar applications.

Components:

  • Body: The main body of the insulator, shaped to hold and support the busbar.
  • Screw Holes: One or two screw holes on either end, typically sized M6 (based on the “6” in the name) for screwing the insulator onto a mounting plate or directly onto the enclosure.
  • Sealing Grommet (optional): Some variations may include an internal rubber or elastomer grommet to create a watertight seal around the busbar, especially for outdoor applications.

Reviews

There are no reviews yet.

Be the first to review “INGCO EE-MEA-IN-SM-30-6-ANDELI,Insulator”