Description

INGCO EE-MEA-PCG-PG25-ANDELI,Cable Gland( EE-MEA-PCG-PG25-ANDELI)

product details:

A PG25 cable gland is a small-sized cable connector used for securing and protecting electrical cables entering enclosures, control boxes, or machinery. They are commonly found in industrial settings and applications where dustproofing or weatherproofing is required for cables with a specific diameter range.

Here’s a breakdown of the key features of a PG29 cable gland:

• Size: A PG25 gland is suitable for cables with diameters ranging from approximately 16mm to 21mm (0.63 to 0.83 inches).
• Thread: It has a PG thread size, with a mounting hole diameter around 35mm (1.38 inches).
• Material: The most common materials for PG29 cable glands are:
  • Plastic: High-strength Nylon (PA) is a widely used option due to its affordability, lightweight nature, and good chemical resistance.
  • Metal: Nickel-plated brass is an alternative for applications requiring higher strength or extreme temperatures.
• Ingress protection: Most PG25 cable glands offer an IP (Ingress Protection) rating of at least IP68. This means they are:
  • Dust tight (no dust ingress)
  • Protected against water immersion for extended periods (exact depth rating may vary by manufacturer)
• Components: A PG25 gland typically consists of:
  • Threaded body: The main body with the PG threads for screwing onto the enclosure.
  • Locknut: This nut tightens the gland onto the enclosure for a secure fit.
  • Sealing grommet: This creates a watertight seal around the cable passing through the gland. The grommet may be made of rubber or another elastomer material.
  • Clamping mechanism: This internal part grips the cable to provide strain relief and prevent it from pulling loose. Depending on the design, this might be a single piece that compresses the cable or separate wedge-shaped pieces.