Description

Ingco HDM08 Dust Mask

• Ingco Tools Original Dust Mask / Face Mask / Safety Mask (NON-MEDICAL) HDM08
• Model: HDM08
• Specifications:
• Complies with standard: 149: 2001 CE0121
• Class: FFP2
• Includes activated carbon fiber
• Maximum humidity: 70%
• Temperature range: +38°C
• Applications: Protection against organic vapors and ozone. For acetylene and electric welding, oxycut, grinding with exhalation valve.
• Directions for use:
• Place the mask over your mouth. The seal of the respirator must be checked before entering the work area.
• Wear the mask at all times when in a contaminated area. Do not remove.
• After leaving the contaminated area remove the mask and discard. In the event any breathing diffculty occurs due to colging, replace mask with a new one.
• Use the mask according to the required occupational health and safety acts and procedures.
• This product is designed to be used once only. Once removed form the face it should be discarded.
• In the event you may feel unwell or droughsy, leave the area you are working in immediately.
• Store the masks when not in use in dust, moisture and contaminant free area.
• Store in an area theat temperature dose not less than +5 and +38 grade C.
• Limitations do not enter areas where the following applicable
• Oxygen concentration is less than 17% (VK-19%)
• Contaminants or their concentrations are unknown. Particulate concentrations exceed levels fixed by applicable health and safety regulations or protection factor x NPF-whichever is lower.