Description

INGCO MCD101151 Abrasive Metal Cutting Disc

The Ingco MCD101151 is a 4-1/2 inch (approximately 115mm) abrasive metal cutting disc designed for cutting various metals. Here’s a breakdown of its key features and uses:

Features:

• Abrasive Material: The disc is made of abrasive grains that are bonded together. These grains wear down as they cut through the metal, creating a fresh cutting surface. Common abrasive materials used in metal cutting discs include aluminum oxide, zirconia alumina, and silicon carbide.
• Reinforced Construction (likely): The disc  has a fiberglass mesh or similar reinforcement embedded within it. This reinforcement strengthens the disc and helps prevent shattering during use.
• 4-1/2 Inch Diameter (115mm): This is a common size for metal cutting discs, compatible with many angle grinders.
• Center Hole: The disc will have a center hole to fit the spindle of your angle grinder. Double-check that the arbor size (usually 22.2mm) of the disc matches your angle grinder.

How the MCD101151 Abrasive Metal Cutting Disc Works:

1. Rotation: When you turn on your angle grinder, the motor spins the abrasive metal cutting disc at high speed.
2. Metal Cutting: As the disc rotates, the abrasive grains make contact with the metal. The hardness of the grains and the high speed of the disc cause the grains to wear away the metal, creating a cut.

Applications:

• Cutting Pipes and Tubes: The MCD101151 is suitable for cutting steel pipes, tubes, conduit, and other ferrous metals.
• Metal Sheet Cutting: You can use it to cut flat metal sheets for various fabrication projects.
• Bolt and Rod Cutting: The disc can be used to cut bolts, rods, rebar, and other metal stock.