INGCO S-DWP-MS-DWP3701 Deep Well Pump-Mechanical Seal
INGCO S-DWP-MS-DWP3701 Deep Well Pump-Mechanical Seal

INGCO S-DWP-MS-DWP3701 Deep Well Pump-Mechanical Seal

INGCO S-AG-BGS-AG10508, Angle Grinder - Large/Small Bevel Gear Set INGCO S-AG-BGS-AG10508, Angle Grinder – Large/Small Bevel Gear Set
INGCO S-AG-GB-AG9501/8, Grinder Gear Box 950W INGCO S-AG-GB-AG9501/8, Grinder Gear Box 950W
INGCO S-DWP-MS-DWP3701 Deep Well Pump-Mechanical Seal

INGCO S-DWP-MS-DWP3701 Deep Well Pump-Mechanical Seal

In stock
0 out of 5
( There are no reviews yet. )

Model name:

S-DWP-MS-DWP3701-INGCO Deep Well Pump-Mechanical Seal

The deep well pump mechanical seal is a critical component in the functionality of subterranean pumping systems. This seal is engineered to maintain the integrity of pump systems by preventing the leakage of fluids and ensuring that contaminants such as gases and liquids do not penetrate sealed areas. The importance of this seal its in their ability to maintain system efficiency and prevent environmental contamination.

 

Features:

Rotary ring and stationary ring

Rubber bellows seals

Single spring

Advantages:

The S-DWP-MS-DWP3701-INGCO Deep Well Pump-Mechanical Seal deep well pump Seal is a large series mechanical seal with a simple yet effective design that is easy to assemble. The special spring arrangement allows a short axial installation length.

 

Materials:

Seal Rotary face: Graphite carbon resin impregnated,

Silicon Carbide, Tungsten carbide

Seal Stationary face: Aluminum oxide ceramic

Operating range:

Shaft diameter:16mm-25mm

Pressure: 0.60MPA

Temperature: -30 °C … +200 °C depending on materials and medium

Speeds: 10 m/s

compatible also with DWP7501,11001,15001,22001 INGCO Deep Well Pump

SKU: S-DWP-MS-DWP3701-INGCO Categories: ,

Description

INGCO S-DWP-MS-DWP3701 Deep Well Pump-Mechanical Seal

The [S-DWP-MS-DWP3701-INGCO]  mechanical seal in a deep well pump plays a vital role in preventing water from leaking into the motor compartment while allowing the pump shaft to rotate. It’s a crucial component for maintaining pump performance and longevity.

Description:

The mechanical seal is located at the bottom of the deep well pump housing, where the motor shaft exits and connects to the impeller (the rotating part that pushes water). It consists of two smooth, flat, wear-resistant faces held together by a spring.

Components:

The deep well pump mechanical seal consists of several key parts:

  • Stationary Seal Ring: This ring is typically made from ceramic or carbon and is fixed to the pump housing. It remains stationary while the shaft rotates.
  • Rotary Seal Ring: This ring is made from a different material with good wear resistance, like carbon or nitrile rubber. It’s attached to the pump shaft and rotates with it.
  • Spring: A spring between the two seal rings applies constant pressure, keeping the faces in contact and creating a tight seal.
  • Set Screw : A set screw that helps adjust the spring tension on the seal faces.

How it Works:

  1. Water Barrier: The smooth, flat faces of the stationary and rotary seal rings create a tight seal that prevents water in the well from leaking into the motor compartment.
  2. Shaft Rotation: The rotary seal ring is attached to the pump shaft and rotates with it as the motor drives the impeller.
  3. Spring Pressure: The spring ensures constant pressure between the seal faces, maintaining a tight seal even as the shaft rotates.
  4. Lubrication: A thin film of water typically provides lubrication between the seal faces during operation.

Uses:

The mechanical seal in a deep well pump serves a critical purpose:

  • Waterproofing: It prevents water from entering the motor compartment, protecting the electrical components from damage and ensuring safe operation.
  • Maintaining Performance: A properly functioning mechanical seal allows the pump to operate efficiently by minimizing energy loss from water leakage.

Reviews

There are no reviews yet.

Be the first to review “INGCO S-DWP-MS-DWP3701 Deep Well Pump-Mechanical Seal”