Description

Remote Controller For Smoke Detector, To Test & Hush

The Smoke Alarm Remote Control will test, hush and locate smoke alarms within the same wireless network. The Remote Control can be mounted either on a wall bracket, or directly on the wall. a. To mount the Remote Control directly on the wall.

The Wireless Remote test and hush switch allows you to control your wireless smoke alarms from a central location. The remote control eliminates the need for climbing on ladders to silence or test your units.

• Battery operated – built-in 10yr lithium battery
• CE Marked
• BS 5839 Part 6 Grade D accessory (to be used with smoke and heat alarms with the appropriate bases). Provides an element of some central control as Grade C.
• Turning on the “Test” switch will activate all interlinked Smoke and Heat Alarms
• Turning off the “Test” switch will reset all of the interlinked Smoke and Heat Alarms
• Makes weekly testing quicker and easier
• The “Hush” function will send all interlinked Smoke and Heat Alarms into a state of reduced sensitivity for a period of about 10 minutes and will then automatically reset
• Unique identification coding eliminates RF interference with other equipment
• LED indicates radio transmission upon suppression of the buttons
• Optional mounting bracket provided with fittings

Pressing the test/hush button simulates the effect of the smoke and/or heat and is therefore the best way to ensure the alarm is operating correctly. For interconnected smoke alarms, test one of the units by pressing the test/hush button for 10 seconds.

The wireless remote controller is a supplementary device that can work with the wireless interlinked smoke alarms, interlinked carbon monoxide detectors, wireless interlinked heat alarms,  and so on.  The main function of the remote controller is to “Test” and “Silence” the interlinked wireless detectors.

According to the regulation, the detectors should be tested every week to make sure the detectors are still working properly.

By installing the remote controller on the wall, you can easily test the smoke alarm by simply one pressing the “TEST” button on the remote controller. You don’t have to take a swabber or rod or sticker to press the detectors on the ceiling.

The wireless remote controller is powered by a DC12V small Alkaline battery and is cable-free. the battery life is about 2-3 years. There is a backup bracket for easily be installed in the wall.

Ad there is the “Hush” button on the remote controller. When there is a false alarm, or you have solved the fire situation, you can easily press the “HUSH” button to make the detector silent.

The silence function is available only when the detector is triggered, rather than being tested. Do not press the “Hush” button when you are just testing the detectors. The detectors will be silenced after the testing, which takes about 8-15 seconds.

When one of the detectors is triggered, all the detectors in the group will sound at the same time. Pressing the “Hush” button, all the detectors will keep silent, except the detector that detected the real fire. So that you can easily know which floor or which area is one fire.

This wireless remote controller is just an optional device. You can test the detectors by press the testing button on the detectors as well.