Description

Telescopic Pole 4 Telescopic Access Pole; Dimensions 2 M To 4 M; 40204002

The 4 meter telescopic access pole. Access poles provide access to detectors which are out of normal reach. Their use saves time, cost, disruption and risk to safety. The poles are lightweight and quick to extend and are made of non-conducting fiber glass construction.
Designed for use with the Solo aerosol dispenser (201-3137), detector removal tool (201-3121) and both the mains powered (453-0555, 453-0561) and cordless heat detector tester (384-6944).

Solo 4MTR Telescopic Pole Fiber Glass Expendable Up to An essential part of the Solo detector testing range, the Solo 100 telescopic access pole offer safe access to detectors installed at height. Without the need for ladders, the telescopic access pole ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005. The non-conductive glass fibre construction protects the user and live equipment from inadvertent short circuits. The telescopic poles are lightweight and easy to use. Access poles save time, cost and disruption and reduce the risk and disruption posed by other access equipment such as towers and ladders.
Solo access poles are the only poles designed and approved for use with the Solo, Testifire and Trutest product ranges. The Solo 100 Access Pole offers safe access to detectors installed at heights of up to 6 meters. Compatible with all detector tester products.

Features

• Optimum strength to weight ratio
• Minimum possible whip or bend at height
• Designed certified non-conductive
• Available in one, two or four telescopic sections
• Simple locking mechanism and easy to use
• Outstanding quality backed by lifetime warranty

Specifications

• Usage/Application to extend the height of device
• Size 4.0 mtrs
• Color Red

Solo poles are designed only to be used with the Solo, Testifire and Trutest product ranges.

Features and Benefits

Non-whip even at height
Certified non-conductive – protecting both the engineer and overhead live equipment from inadvertent shorts

Solo poles should always be held vertically when raising or lowering. Ensure that all extension poles and test tool buttons are locked into position before extension and use. When using Solo 101 extension poles in conjunction with telescopic poles (Solo 100 or 108), the telescopic pole should be at the shortest length, i.e. not extended, before attaching or removing the Solo 101 extension pole(s) or tool. No more than 3 x Solo 101 extension poles should be used at the same time (see General Recommendations for height & angle advice). When lowering, always hold in the vertical. Lower telescopic sections first, before removing Solo 101 extensions. When lowering telescopic poles, rest the base of the pole on the floor and depress the locking button, while lowering the upper sections with the other hand.

Never allow an extended pole section to collapse uncontrolled. Risk of injury and equipment damage.

CAUTION: It is recommended that Solo poles are inspected before and after use and if any signs of damage, abnormal wear or modification are found, the poles should not be used. Do not create trip hazards by leaving poles unattended in public spaces and avoid leaving poles extended when not in use (against walls, across desks etc.). Risk of injury and equipment damage. Solo poles are not specified for use in high voltage areas. Risk of injury and equipment damage.

When working at height it is recommended that a competent person carries out a suitable risk assessment. This will identify any risk to the user and/or the environment, or other safety measures, and hence any need for Personal Protective Equipment (PPE). Do not use Solo poles if unable to control their use properly e.g. when fatigued. Risk of injury and equipment damage